Info How To Flash Stock ROM Via Manufacturing Flashtool (MFT)

Follow the brief and straight-to-the-point instructions below to flash stock ROM / flash file on your device using Manufacturing FlashTool.

If you have problems identifying the exact flashing guide for your device firmware, post in http://moymoycikukecik.blogspot.com /p/requests.html">help/requests sections.

Downloads

• Manufacturing Flash Tool - Download
• Android stock ROM / Firmware - http://moymoycikukecik.blogspot.com /p/stockroms.html">select your device - http://moymoycikukecik.blogspot.com /2016/09/collection-of-lava-stock-roms-firmware.html">Lava stock ROMs

How to setup and use Manufacturing FlashTool (MFT)

• Download MFT from the link above.
• Extract the content of the zip file. Should be a folder like: Android firmware installation package
• Open the folder and run/install IntelAndroidDrvSetup1.5.0.exe
• Once installation is complete, run/install iSocUSB-Driver-Setup-1.2.0.exe
• Wait for the installation to finalize, the run Manufacturing Flastool setup.
• Once done, click on File and select setting. 
• Adjust the setting as shown in the screenshot below

 

• Unzip Firmware the downloaded firmware
• Click on open in MFT and select Flash file.

• Power off / shutdown your device (Lava X80, for instance) and connect it to PC. 
• Flashing progress should now begin.
• Wait for the firmware to flash completely, then reboot your phone.
• Done

If you have any problems using this guide to flash your device stock ROM / firmware, use the comments section below to notify me.