Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution - this blog we have built from a few years ago and already very much information about gadgets that we convey and a lot of blog visitors
New Blog Techno News who are satisfied with the information, we will always try to update the latest information for you, first about Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution many already we collect data to make this article so you do not miss the news, please see:
Articles :
Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution
full Link :
Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution
Article Nokia X6,
You can also see our article on:
Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution
Here's the solution that might possibly help solve
Nokia X6 mouthpiece
microphone failure, a problem that no
audio sounds can be heard from the other receiving device during a call is created.
Nokia X6 Microphone sound failure solution
The red lines indicated in the solution above is the microphone's supply voltage if this voltage is cut or not present the mic will not tend to work. There are also resistors that where the digital audio signal is flow across to this components that has a resistance value of 100ohms each, check and replace it first before attempting to replace the Digital Microphone Module.
articles Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution finished in discussion
hopefully the information we convey about Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution can benefit you in getting new knowledge about technology,
you just finished reading the information Info Nokia X6 Digital Mic, mouthpiece microphone problem Solution we hope this informmation can answer the question you submit to googlle, if you want to bookmark or share please use link https://moymoycikukecik.blogspot.com/2014/03/info-nokia-x6-digital-mic-mouthpiece.html and do not forget to always visit this blog to get the latest information every day.
Tag :
Nokia X6,
The red lines indicated in the solution above is the microphone's supply voltage if this voltage is cut or not present the mic will not tend to work. There are also resistors that where the digital audio signal is flow across to this components that has a resistance value of 100ohms each, check and replace it first before attempting to replace the Digital Microphone Module. 
0 komentar:
Posting Komentar